3PCS Stainless Steel Butt Weld Ball Valve

Short Description:

The closing of the solder ball valve is a sphere, which is a valve that is turned on and off by the ball around the center line of the valve body at a 90 degree rotation.The straight ball valve is mainly used to cut off the media in the pipeline.There are two – chip and three – chip structure, butt welding, groove welding and flat welding.Solder ball valve is a new type of valve widely used in recent years. This valve can be installed horizontally or vertically.

Product Detail

Product Tags

The welding ball valve has the following advantages

1. The fluid resistance is small, and the resistance coefficient is the same as that of the same length.

2. Simple structure, small size and light weight.

3. Close and reliable, the sealing material of ball valve is widely used in plastic and sealing, and has been widely used in vacuum system.

4. Easy to operate, open and close quickly, from open to close just rotate 90 °, is advantageous for the remote control.

5. Easy to maintain, simple structure of ball valve, the sealing ring is generally active, it is convenient to remove and replace.

6. The sealing surface of the ball and seat shall be separated from the media when full or closed, without causing erosion of the sealing surface of the valve.

7. Wide range of applications, ranging from small to several millimeters, large to several meters, from high vacuum to high pressure can be applied.

  • Previous:
  • Next:

  • Write your message here and send it to us